Skip to content
SynthIDX

Clean the AI Logo Off Your Clip, Frame by Frame

AI Video Watermark Remover

Tracks supported AI video marks across frames and strips the container metadata in one job. Video SynthID has no public decoder, so it is outside this page.

Sign in to run. Free credits included.

Frame-by-frame cleanup of supported AI video marks · Container metadata stripped in the same job · Video SynthID stays, because no public decoder exists

What counts as an AI video watermark

An AI video watermark can sit in three different places. The first is the visible layer: a logo or wordmark drawn into the frames themselves, which anyone watching the clip can see. The second is the container: metadata written into the file at export, such as Content Credentials, generator names, and encoder tags. The third is an invisible signal woven into the pixels, which a machine can read and a person cannot.

Most generators stamp more than one of these layers on the same export. A single clip can carry a visible badge in the corner, a C2PA record in the container, and an imperceptible pixel signal at the same time. That matters when you shop for a remover, because a tool that clears one layer leaves the others exactly where they were.

This page covers the first two layers in one pass. A supported visible mark is tracked and rebuilt frame by frame, and the container metadata is stripped in the same job. The third layer, an invisible pixel signal such as video SynthID, is outside the pipeline, and the sections below explain why instead of leaving you to find out after paying.

The visible layer is not one shape across platforms. Veo and Kling tend to hold a corner logo in a steady position, which makes the repair region predictable. Sora moves its mark across the footage for the life of the clip, so the region to rebuild changes every second. A general-purpose video remover has to handle both cases without being told which generator produced the file.

How it works

How to remove an AI watermark from a video

  1. Step 1: Upload your AI video

    Drop the clip into the panel at the top of this page. MP4 and MOV are the usual exports from AI video tools, and WebM and MKV are accepted too. The upload goes straight to storage and is used only for your job. Upload the original export at its native resolution rather than a compressed copy, because tracking is easier on cleaner frames.

    Tip

    A screen recording of a video usually has a different opacity and scale for the mark. It can still be cleaned, but results are less predictable.

  2. Step 2: Run the cleanup

    Press run and one lite-tier job does both layers. The pipeline scans every frame, locates the supported mark, and rebuilds the pixels behind it while keeping the result stable from one frame to the next. The same job strips the container metadata, so creator fields and Content Credentials leave the file in the same run. The panel shows the cost first: 5 credits for the job.

    Tip

    Longer and higher-resolution clips take proportionally longer, because every frame is analysed and rebuilt.

  3. Step 3: Review and download the clean file

    When the job finishes, compare the before and after previews. Scrub through the middle of the clip and watch the area the mark used to occupy, since that is where any mismatch between frames would show up. Then download the result. Container, resolution, frame rate and duration stay the same, and the audio comes through untouched, though the video track is re-encoded so the file size can grow.

    Tip

    Reconstructing footage behind a mark is harder when it crosses faces, text, or fast motion. Expect small local artifacts on the busiest segments, and check those moments before you publish.

Supported AI video marks

  • Sora

    OpenAI stamps a visible mark that moves between frame positions instead of holding one corner. The tracker follows the moving mascot and wordmark and rebuilds the footage behind them.

  • Veo

    Google Veo clips carry a fixed mark in the bottom-right corner, either the four-point diamond or the older Veo text, plus a SynthID layer in the pixels. This job cleans the visible mark only.

  • Seedance

    ByteDance Seedance output reaches you through apps such as Doubao and Dreamina. The visible mark is a boxed AI label in the bottom-right corner, and the tracker locks onto it in every frame.

  • Doubao

    The Doubao app exports short videos with a fixed AI label in the bottom-right corner. Upload the exported file as it is and the job tracks the label across the whole clip.

  • Dola

    Dola is ByteDance's international AI app and the overseas sibling of Doubao. Its exports carry a fixed Dola AI text label in the bottom-right corner, tracked the same way as the Doubao label.

  • Hailuo

    MiniMax ships Hailuo through its web platform, app and API. The visible mark is a composite MINIMAX and hailuo AI label along the lower edge, and the job rebuilds the full label box.

  • Vidu

    Vidu from Shengshu Technology uses a two-loop logo and wordmark in the bottom-right corner. It is the newest detector in the set, so preview the result before you rely on it.

  • Kling

    Kling from Kuaishou keeps a mark along the bottom-right edge, with the logo, wordmark and version suffix. The frame-by-frame pass rebuilds that edge, and the dedicated Kling page covers the specifics.

Temporal consistency, so the cleaned area does not flicker

A video is a sequence, not a stack of photos. Tools that process each frame on its own produce a slightly different reconstruction on every frame, and those small differences read as shimmer when the clip plays. This pipeline tracks the mark across frames and keeps consecutive reconstructions coherent, so the rebuilt region evolves smoothly as the mark moves away from it. The result looks like the scene rather than a patch stamped on 24 times a second.

  • The tracker follows the mark from frame to frame instead of searching from scratch on each one.
  • Consecutive reconstructions share context, which keeps texture and colour steady behind the mark.
  • You can verify the result yourself in the preview by scrubbing through the middle of the clip.
  • Longer clips take more time, because every frame is analysed and rebuilt with its neighbours in mind.

Why video SynthID is outside this page

Google DeepMind embeds SynthID into generated video by marking every frame of the clip (https://deepmind.google/blog/watermarking-ai-generated-text-and-video-with-synthid/). The signal is designed to stay readable after cropping, filters, frame rate changes, and lossy compression (https://deepmind.google/models/synthid/). That is the opposite of a visible logo, which a remover can find by looking at the picture.

Google checks for the signal through its own products: Gemini, Search and Chrome can look at an uploaded file, and the SynthID Detector portal reports whether a watermark is present. What does not exist is a public decoder or a documented removal endpoint. Without one, no third-party tool can inspect the signal, target it, or prove that a pass removed it. A service that claims to verify video SynthID removal is claiming access it does not have.

So this page draws the line before the job starts. Uploading a Veo clip here cleans the visible mark and the container metadata, and the SynthID signal stays in the frames. A detector using Google tools may still report the clip as AI generated. What stays is that pixel layer, and honesty about it is more useful than a promise the pipeline cannot keep.

If your goal is to understand the signal before deciding what to do, the detector pages on this site cover what can be checked and what cannot. The cleanup on this page is about making a clip of your own look right, not about defeating provenance.

What stays after the visible mark is gone

A cleanup is not a reset. Several things stay in the file or around it, and knowing them up front saves a second upload. Video SynthID stays, as the previous section explains. An audio watermark, if the generator added one to the soundtrack, also stays, because the job rewrites video frames and leaves the audio stream untouched.

Marks that are not on the supported list stay as well. A channel logo added by a third party, a sticker, a subtitle block, a timestamp burned in near the edge: none of these belong to the detection set the tracker looks for, and the job will not hunt for them. A clip from a generator that is not on the list is best-effort at most, and often simply out of scope.

Platform-side disclosure is another layer no file tool can reach. When you post a clip, the platform may add its own visible label or record based on its own policies and its own reading of the upload. Cleaning a file before posting does not change what the platform decides to show afterward.

A screen recording or a heavily re-encoded copy degrades every part of the pipeline. The mark loses contrast, the frames gain compression artifacts, and the tracker has less to hold on to. You can still run the job, but check the preview before you rely on the output.

Limitations and honest expectations

Video SynthID does not come off

The invisible signal Google embeds in every frame is not removed by this job, and no public decoder exists for it. A detector that uses Google tools can still flag the clip as AI generated after the visible mark is gone.

Unsupported marks stay in the frame

If your generator is not on the supported list, or the mark is an overlay added by someone else, the tracker has nothing to target. Check the supported list before uploading, and treat anything outside it as not covered.

Busy motion can leave traces

Reconstruction is easiest over sky, walls, and smooth gradients. It is harder when the mark crosses faces, text, or fast motion. Expect small local artifacts on the busiest segments, and review those moments in the preview.

The video track is re-encoded

Resolution, frame rate, container, and duration stay the same, and the audio stream is passed through. The video track is rewritten, though, so the output file size can grow, and compression artifacts already present in the source remain.

Metadata can be added back later

The job strips the container metadata present at upload. An editor, a converter, or a platform can write new provenance fields when the file passes through it again, so the strip is a point-in-time result rather than a permanent state.

Your footage must be yours

This tool is for clips you generated yourself or otherwise have the rights to modify. Removing a provenance mark does not change who owns the underlying rights, and each generator has its own terms for its outputs.

Identity and official documents are not supported

This tool is not for passports, identity cards, driver licenses, visas, certificates, statements, or other official documents, whether the document is real, generated by AI, or put together from a template. Editing one of these can be document fraud, and we close accounts that try. Use the tool on other images you generated or have the right to edit.

What the job returns, and how a video job is priced

The output keeps the container you uploaded. An MP4 comes back as an MP4, a MOV as a MOV. Resolution, frame rate, and duration are preserved, and the audio is copied through without a second encode. The video track is re-encoded as part of the rebuild, which is why the file size can move in either direction.

Pricing follows the lite tier: 5 credits per video job. New accounts start with 100 free credits, which covers the first twenty video jobs. A job includes both layers, the frame-by-frame visible cleanup and the container metadata strip, so you do not pay twice for two passes. The panel always shows the cost before you press run.

The larger number of supported generators, from Sora and Veo to the ByteDance, MiniMax and Shengshu lines, is why this page exists instead of one page per model. The platform pages linked below go deeper on the marks that behave in distinctive ways, and the video metadata page covers the container layer on its own.

FAQ

Frequently asked questions

Common questions about this AI video watermark remover, from which marks are supported to what stays in the file.

Explore more tools

Sora Watermark Remover

How the moving Sora logo drifts across the frame and how the same tracker rebuilds the pixels behind it.

Open tool

Veo Watermark Remover

The dedicated page for Google Veo clips, including why the SynthID layer stays after the visible mark is gone.

Open tool

Kling Watermark Remover

Kling keeps its mark in a steady corner, and this page covers the cleanup path for Kuaishou exports.

Open tool

Video Metadata Remover

Strip C2PA and container tags from video files without touching a single frame.

Open tool

C2PA Remover

The signed credential record this job clears from the container, explained field by field.

Open tool

AI Watermark Remover

For stills exported from the same clips, where the general image pass covers visible marks and pixels.

Open tool

All tools

Every remover and detector on one page, grouped by what each one cleans or checks.

Open tool

Remove the AI logo and the container metadata in one job

Upload a supported clip and the frame-by-frame pass cleans the visible mark while the same job strips the container metadata. New accounts start with 100 free credits.