Skip to content
SynthIDX

Read the Pixels When the Metadata Is Gone

AI Image Detector

Upload an image to detect AI image content. Get a confidence tier and a source-family read on which model family likely made it.

Sign in to run. Free credits included.

Reads the pixels directly, even when metadata has been stripped. · Your file uploads straight to storage and is used only to produce your report. · Reports a confidence tier and says so when the evidence is too weak to call.

What is an AI image detector?

An AI image detector estimates whether a picture came from an AI model or a camera. It works from evidence inside the image itself, which falls into two broad families. One is written provenance. A generator attaches metadata records to the file, such as C2PA Content Credentials. The other family is statistical. Generative models leave texture, noise, and frequency patterns behind in the pixels. Those patterns survive whether or not any metadata does.

This detector takes the statistical route. Its classifier was trained on large sets of real photographs and AI-generated images. It reads pixel patterns that tend to separate the two. Those patterns survive a clean export, a metadata strip, or a re-share without provenance records. That makes the tool useful for the files where metadata checks come up empty.

One check runs two operations and combines them into a single report. The first is an AI-likelihood verdict. It says whether the pixels look AI-generated or look like a real photo, and it can also return a gray zone where the check refuses to call. The second is a source read. It names the maker the pixel patterns most resemble, and says so when nothing matches closely enough.

How a classifier differs from a watermark check

A classifier and an AI watermark detector answer the same question from different evidence. A classifier generalizes. It learns what AI-made images tend to look like, from residual noise and spectral signatures to texture statistics. Then it applies that model to any file, though the reading weakens on generators released after training. The reading is a probability, so it is reported as a confidence category.

An AI image watermark detector looks for something deliberately planted. Google’s SynthID, for example, embeds a pattern in the pixels at generation time. Detecting it means testing for that specific pattern. For watermarked files that route gives a sharper answer. An image from a generator that plants no watermark has nothing to find. Most open models and many commercial ones fall into that group. If you arrived searching for a Google AI image detector, note the split. The SynthID Detector on this site covers the watermark route, while this page covers the statistical one. The two are designed to be used together.

In practice the two routes complement each other. A Midjourney render with its metadata stripped is invisible to a watermark check. It still carries statistical traces. A Google-made image can be confirmed through its watermark declaration trail. The classifier adds an independent read that does not rest on an embedded marker. A heavily compressed screenshot may defeat both. Every result on this page therefore comes with its confidence tier.

How it works

How to check if an image is AI-generated

  1. Step 1: Choose the best-quality file you have

    Select the original image. Accepted files are PNG, JPEG, WebP, BMP, TIFF, HEIC, HEIF, and AVIF, up to 20 MB.

    Tip

    Higher-resolution, less-compressed files preserve the fine statistics the classifier reads. Screenshots and re-shared copies weaken them. A weak verdict on a degraded file says more about the file than about its history.

  2. Step 2: Run the check

    Start the job, and both operations run in one pass. You get the AI-likelihood verdict over the pixels, plus the source-family fingerprint read. The estimate is 10 credits per full check.

    Tip

    The file uploads straight to storage and is used only to produce your report. It is not shared or published.

  3. Step 3: Read the report and weigh it as evidence

    Each operation returns its own card. One card gives the AI verdict with a confidence category. The other names the maker the pixels most resemble, or says plainly that nothing matched. Treat the result as a screening signal. For anything that matters, combine this report with a watermark-and-credentials check and a look at where the file came from. The FAQ below lays out that layered method.

    Tip

    The tier is categorical, so it names a band of signal strength rather than a percentage. Quote it alongside the verdict: "Definitely AI-like" and "possibly AI-like" carry different weight.

AI photo detector for photos, art and product shots

Photographs are where a false AI label does the most damage. They are also where real verification starts. Marketplaces screen seller photos, newsrooms screen submissions, and social platforms screen profile pictures. A statistical read is the first pass for all of them. It does not depend on the uploader preserving metadata, which is exactly what a bad actor would strip. The same read is useful in the other direction: it can confirm that a suspiciously polished image is a real photograph.

Digital art and illustration raise the stakes differently. Much of what circulates in art communities is now a blend. Human work gets finished by AI tools, and AI drafts get finished by hand. The classifier reads the pixels it is given, so a heavily reworked hybrid can land on either side. The verdict describes the final statistics of the file, not its creative history. Treat it as one input into disclosure and attribution decisions.

Product shots sit between the two. E-commerce imagery increasingly includes AI-generated renders and composites, and buyers deserve to know what they are looking at. The detector flags the statistical signature of generated imagery on product-style photographs. The source-family read can sometimes name the pipeline behind it. A professionally retouched studio photo goes through heavy processing of its own. An unexpected result deserves a second look at the original file.

What the report tells you

  • AI likelihood

    The verdict reads AI-generated, likely a real photo, or undetermined when the evidence is too weak to call.

  • Confidence tier

    The report gives a categorical tier: definitely AI-like, possibly AI-like, or likely human. It is never a percentage.

  • Source family

    The source card names which maker the pixels most resemble. The read covers ten generator families: OpenAI, Google, ByteDance, FLUX, Stable Diffusion, Meta, Midjourney, Ideogram, Adobe Firefly, and xAI. When nothing matches closely enough, it reports the image as unattributed.

Checking videos: what works today

This page checks still images only, and that boundary is deliberate. The pixel check and the source check were trained on single frames, and the uploader rejects video files.

The engine behind this tool can run a visible-signal check on video. That inspection looks at on-frame marks, logos, and overlay evidence instead of judging frame statistics. Statistical AI classification of video, frame by frame or end to end, is not offered here yet. When it ships, it will report confidence the same way the rest of this page does.

The practical interim method: extract the keyframes you are suspicious of. Take the opening frame, a title card, or a mid-scene still. Save them as image files, and run them here. Frame-level verdicts carry the usual caveats. A video assembled from generated stills will often show it frame by frame.

AI generators the source read covers

  • Models from big labs

    OpenAI, Google, Meta, ByteDance, and xAI make up this group. The read names a family when the pixel statistics sit close enough to its exports.

  • Image generation services

    Midjourney, Ideogram, and Adobe Firefly run as hosted services. Their exports keep family-level statistical traces even after the metadata is stripped.

  • Widely used model families

    FLUX and Stable Diffusion run locally and on hosted services, so you may be checking files that have been re-exported several times. The least-processed copy gives the clearest reading.

  • Not attributed

    When no family matches closely enough, the report marks the image as not attributed. The AI-likelihood verdict still runs on the same file. That label means no family matched. It says nothing about whether the image is AI.

Why did my real photo get flagged?

False positives happen, and any tool that denies it is not being straight with you. A real photograph can pick up AI-like statistical signatures through innocent processing. Beauty filters, skin-smoothing, noise reduction, heavy sharpening, and HDR merging all leave a mark. So do repeated rounds of compression and re-encoding. A photo that has been processed on its way to you carries different statistics. Distance from an untouched camera original can push the verdict either way.

The classifier is built to blunt the most common errors. Its "definitely" tier requires two independent checks to agree. When only one finds a signature, the result is reported as "possibly AI-like". Weaker evidence becomes undetermined, and some genuinely AI-made images land there. The design trades a little recall for fewer false accusations. That trade suits a tool people use to judge the content of others.

If your photo was flagged, check the original. That means the least-processed version, straight from the camera or the first save. Re-run from that file before drawing any conclusion, and keep the stakes in mind. An automated tier is a screening signal. It is never enough to accuse a photographer of faking a picture.

Limitations and what to expect

Every verdict is an estimate

Each verdict here is a statistical judgment about pixels. No classifier output, at any confidence tier, proves that an image is or is not AI-generated. Verdicts can be wrong in both directions. Real photos get flagged, and AI images pass.

Models evolve and fingerprints drift

Generators improve, and the statistical traces they leave change with every release. A classifier trained on today’s families will be least reliable on tomorrow’s generators. Source attribution only covers the makers the model was trained on. It reports no family for everything else.

Small images and heavy compression lower confidence

Aggressive compression, tiny resolutions, and repeated re-encoding destroy the fine statistics the classifier reads. Low-quality files get lower-confidence tiers and more abstentions. Feed the tool the best-quality copy of the image you can obtain.

FAQ

Frequently asked questions

Straight answers about what this AI image detector can and cannot prove. It also covers how the confidence tiers work, and what happens to your files.

Explore more tools

SynthID Detector

Check an image for Google SynthID declarations, C2PA credentials, and metadata signals.

Open tool

SynthID Remover

Strip SynthID declarations and AI provenance out of generated images.

Open tool

Metadata Remover

Remove EXIF, IPTC, and C2PA metadata from any image in one pass.

Open tool

AI Watermark Detector

Pair the confidence score with a SynthID check and a plain account of what each test can prove.

Open tool

Image Metadata Viewer

Inspect C2PA, GPS and generator tags inside an image without changing the file.

Open tool

Remove AI Detection from an Image

Rebuild the file after stripping metadata and visible marks, with no promise of a negative detection.

Open tool

All tools

Every remover and detector on one page, grouped by what each one cleans or checks.

Open tool

Check your image for AI generation

The classifier reports whether a model likely made the file. You also get a source-family read. For watermark-level evidence, send it through the SynthID detector as a second opinion.